Click to view larger image

Xcel-Arc MIG500SWF Multifunction MIG Welder 500 Amp MIG/TIG/MMA

415v Three Phase, Industrial Rated
Separate Wire Feeder, Trolley
Welds: Steels, Stainless, Cast Iron, Bronze, Aluminum, Copper

Features

•    IGBT inverter technology
•    MIG/MAG with Gas and Gasless wire function
     - Soft Start
     - Variable inductance
    - Crater fill function
    - Burn back control
    - Wire inch
    - Gas check
    - 2T 4T Trigger control
•    MMA function (Stick electrode)
    - VRD (Voltage Reduction Device)
    - Hot start (improves electrode starting)
    - Adjustable Arc Force
•    DC TIG
    - Lift Arc  (prevents tungsten sticking at arc ignition)
    - 2T 4T Trigger control
    - Adjustable downslope
•    Separate wire feeder
    - gear driven 4 Roll
    - 10M interconnecting cable set
•    Euro style Mig  torch connection    
•    IP21S  environmental/safety protection rated
•    Excellent Mig welding with CO2 gas
•    Push Pull & Spool Gun Connection

Technical Data Power Supply / Phases (V-Ph) 415 -3 +/- 15% Duty Cycle @ 40°c as per AS/NZ60974 40% @ 500 Amps MIG 40% @ 500 Amps MMA Duty Cycle @ 25°c (approximate) 70% @ 500 Amps MIG 70% @ 500 Amps MMA Output Current Range MIG 50A/16.5V - 500A/31.5V Output Current Range MMA 20A/20.8V - 500A/34.0V Rated Power MIG 12.7 KVA I Max MIG 34.0 Amps MMA 35.0 Amps I ieff MIG 26.0 Amps MMA 27.0Amps Wire Feeder Type Separate Gear Driven 4 Roll Protection Class IP 21S Insulation Class F Dimensions Power Source (LxWxH) 595x280x440mm Weight Power Source 40.6 Kg Dimensions Wire Feeder (LxWxH) 630x235x420mm Weight Wire Feeder 14 Length of Interconnecting Cable 10m Warranty 24 months machine only Certifi cation Approval AS/NZ60974.1

Overview

The XA-MIG500SWF is an inverter-based Mig welding machine with added Stick and Tig function. This is an industrial machine equipped with a separate 4 roll gear driven wire feeder and 10m interconnecting cables. The Mig function allows you to weld with Solid wires, Fluxcored Gas and Gasless wires. Adjustment of Voltage & Wire Feed at the wire feeder make for easy setting of welding parameters and give the convenience of remote adjustment from the power source. Crater Current setting delivers perfect fi nishing of the weld, the electronic Inductance offers fi ne adjustment of the arc characteristic and Burn Back adjustment leaves the wire stick out ready for the next weld. Wire Inch and Gas Check provides set up of wire feed and gas setting without wastage of wire or gas. Added Stick welding capability delivers easy and high quality welding using electrodes, including cast Iron, stainless and low hydrogen. Connection of the XA17V Tig torch provides quality DC Tig (scratch start) welding of steel, stainless steel and copper. Ideal for heavy and structural welding applications, general engineers, maintainance workshop, rural workshops. Designed and built to our specifi cation. Certifi ed to - AS/NZ60974